ES-505
1-113
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
G - MACHINE MAINTENANCE
2. MAINTENANCE LIST
Maintenance list
Once a day
10 hours
Clean sewing mechanism area
Clean frame area
Check cutting knife edge
Check waste hole in the cutting block
Clean sliding screw in cutting block mechanism (Ultraflex)
Check level of condensate in regulator filter
Once a week
80 hours
Lubricate needle bar and sewing mechanism
Lubricate sliding block mechanism (Ultraflex)
Recharge oil into oil tanks
Once a month
300 hours
Check sewing mechanism drive play
Check filth in filter sleeves in control box
Check tank and waste oil
Check screw joints tightness (keep values below)
Recommended values for screws freeze (Nm)
M3
0,5
0,6
0,8
M4
1,2
1,5
2,0
M5
2,5
3,0
4,0
M6
4,0
5,0
7,0
M8
8,0
16,0
M10
10,0
30,0
3. MACHINE DISPOSAL
3.1. To make sure the machine is disposed ecologically, it is necessary to remove all nonsteel parts from machine.
Once such parts are removed, partial disassembly is needed, covers be removed, machine arm dismantled and
machine pulled out from the frame.
3.2. Separate aluminum parts, hard aluminum parts, non-ferrous metal parts and plastic parts and have them
processed separately.
3.3. Parts mentioned in ad) 3.2 are listed in spare parts manual and market as follows:
Aluminium and hard aluminium parts
Non-ferrous metal parts
Plastic and non-steel compositions