AMF ES-505, Parts And Service Manual, Page: 15 / 146

ES-505
1-1
A - INTRODUCTION
Released: 01/2018
E-mail: service@amfreece.cz; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
1. BASIC INFORMATION
Thank you for buying our electronic buttonhole machine ES 505. Before putting the machine into initial operation,
please read carefully this service manual. The first part covers installation, adjustment, operation and service of the
machine. The second part is to provide information to help with ordering spare parts for this machine.
ES-505 is electronic apparel buttonhole machine. It is used for sewing all types of buttonholes on different kinds of
fabrics and with options of cut before (CB) or cut after (CA) sewing. The machine can sew chain stitch with double
or single thread and optionally with gimp.
The machine is equipped with patented mechanisms to lower noise and vibration during high production. Basic
sewing parameters are set on the touch display using simple and understandable graphics. The ES 505 machine was
designed and produced in such way to be reliable safe and user friendly.
Machine models of ES 505 have different types of trimming mechanism. For the models see the table below.
Basic types of trimming machanism
Trimming mechanism
offered with machine
types
AF CT LTT
AF CT 14 - 26 LTT
AF + I CT 22 - 35 LTT RDE
AF + RDE CT 14 - 26 + 1 ULTRAFLEX
ULTRAFLEX CT + RDE
Abbreviations used in the manual
CA
Cutting buttonhole after sewing
CB Cutting buttonhole before sewing
AF
Automatic top thread trimming
CT Automatic trimming of all threads – short tail
LTT Automatic trimming of all threads – long tail
RDE Round eylet
Ultraflex Automatic cutting lenght system of buttonhole
I Indexer