ES-505
1-47
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - MACHINE CONTROLS
2.6.2.
Cutting the straight part of the buttonhole
Press the button
7
on the parameters screen for Ultraflex cutting. Cut length and position screen comes up.
Press the button
8
set the cutting length within the range 8 - 25 mm for UFX - LP1 and 24 - 33 mm for UFX - LP2.
Press the button
9
and set the cutting distance from the bar within the range 0 - 22 mm for LP1 and LP2.
The current cutting shape and cutting position is shown by the icon
10
.
Note
:
Maximal values of set parameters depend on buttonhole length setup.
2.6.3.
Cutting the eye or part of buttonhole with the eye
This option enables cutting only the eye (UFX - LP1) or the part of buttonhole with eye (UFX - LP1 or UFX - LP2).
Press the button
11
and activates the cutting.
Press the button
12
and set up the cutting length within the range of 5 - 30 mm for UFX - LP1 or 13 - 38 mm for UFX
- LP2.
The current cutting shape is shown by the icon
13
.
Note
:
Minimal value depends on the eye type selected, maximal value depends on the buttonhole length setup.