Lubrication
hole
ES-505
1-25
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
C - PROPER USAGE
2. LUBRICATION
CAUTION
!
Before you start lubricating machine mechanisms, switch off power supply and air inlet from the machine!
Note
:
To lubricate mechanisms in the machine use the recommended
oil Esso Terestic T68 or Mobil Terestic T68 only.
2.1. FILLING UP OIL
• Before using the machine for the first time, fill up oil tanks.
There are two lubrication circles in the machine – one to run
needle bar and bite, second to drive sewing mechanism,
which is placed at the bottom of the sewing head.
•
To access the second tank, tilt the machine head and loosen
the security bolt
1
on the left side of the machine frame. Fill
up the tanks with 2/3 at the most.
•
Recommended period to check the level of oil is once a
month, depending on the machine performance.
CAUTION
!
If there is more than 2/3 of oil in the tank, the oil may leak out
into the machine.