ES-505
1-41
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - MACHINE CONTROLS
2.3.4. BUTTONHOLE ENDING SETUP
Buttonhole can have open end, fly bar, cross bar or round end – see section
A 7.1
. For each ending setup follow the
instructions in the chapters bellow.
2.3.4.1. SETTING BUTTONHOLE OPEN END
Press the button
1
on the main screen. The screen shows possible buttonhole ends.
Use buttons
2
to select the required buttonhole end.
Press the button
3
, which stand for the open end of an buttonhole.
Press the button
4
and add or remove the number of stitches in the range of ± 5 at the end of the second raw of
stitches.
2.3.4.2. SETTING BUTTONHOLE FLY BAR
Press the button
1
on the main screen. The screen shows possible buttonhole ends.
Use buttons
2
to select the required buttonhole end.
Press the button
3
, which stand for the fly bar end of the buttonhole.
Press the button
4
to specify the fly bar. In the range of 3 - 29 mm.
Press the button
5
correct the stitches within the range 0,5 - 2,00 mm so that hey overlap.
Press the button
6
and add or remove the number of stitches in the range of ± 5 at the end of the second raw of
stitches in the fly bar.
Press the button
7
and add or remove stitches at the end of the second raw in the fly bar ± 5 stitches.
Press the button
8
and correct the ......in the fly bar ± 5 stitches.
Press the button
9
correct the .....in the fly bar ± 5 stitches.