manualshive.com logo in svg

Amazone AD 3000 Super Classic Line, Operating Manual

Share
Download
Amazone AD 3000 Super Classic Line Operating Manual Download Page 72

 

 

 

Structure and function 

 

 

72 

 

AD 3000 Super  BAH0107-0  02.20

 

5.10.2  Exact following harrow pressure 

The exact following harrow pressure determines the tillage intensity of the exact following harrow and 
depends on the soil texture. To achieve uniform coverage of the seed row with soil, the exact following 
harrow pressure must be set higher on heavy soil than on light soil. 

The exact following harrow pressure is 
generated by tension springs that are tensioned 
using a lever (Fig. 65/1). 

The lever is in contact with a pin (Fig. 65/2) in the 
adjuster segment. The higher the pin is inserted 
in the group of holes, the greater the exact 
following harrow pressure. 

 

 

Fig. 65 

 

Summary of Contents for AD 3000 Super Classic Line







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands