Amazone AD 3000 Super Classic Line, Operating Manual

Page: 31 / 198

General Safety Instructions
AD 3000 Super BAH0107-0 02.20
31
2.16.3 Electrical system

When working on the electrical system, always disconnect the battery (negative terminal).

Only use the prescribed fuses. If fuses are used that are too highly rated, the electrical system
will be destroyed – risk of fire.

Ensure that the battery is connected correctly – first connect the positive terminal and then
connect the negative terminal. When disconnecting the battery, disconnect the negative terminal
first, followed by the positive terminal.

Always place the appropriate cover over the positive battery terminal. If there is accidental earth
contact, there is a danger of explosion.

Risk of explosion. Avoid sparking and naked flames in the area of the battery.

The implement may be equipped with electronic components whose function can be influenced
by electromagnetic radiation from other devices. Such interference can pose risks to people, if
the following safety information is not observed.

In the case of retrofitting electrical units and/or components on the implement, with a
connection to the on-board power supply, the operator is responsible for checking whether
the installation might cause faults on the vehicle electronics or other components.

Ensure that the retrofitted electrical and electronic components comply with the EMC
Directive in the appropriate version and carry the CE mark.