Amazone AD 3000 Super Classic Line, Operating Manual

Page: 159 / 198

Transportation
AD 3000 Super BAH0107-0 02.20
159
9 Transportation
DANGER
In Germany and several other
countries, the transportation of
implements mounted on the tractor
on public roads and routes is
approved up to a width of 3.0 m.
Fig. 204
Transport of a combination over 3.0 m wide is
only permitted on a transport vehicle in these
countries. Place and secure the combination
consisting of soil tillage implement, roller and
seed drill on the transport vehicle in accordance
with regulations. Do not exceed the max.
transport height of 4.0 m.
Read the transport width of the seed drill and soil
tillage implement combination from both
operating manuals. The data can be found in the
"Technical data" section.
9.1 Moving the seeding combination into transport position
1. Press the pause button on the control terminal (if required).
Pressing the pause button before folding the track markers prevents the tramline counter from
advancing by one digit.
2. Move the track marker to transport position and secure it ............................................... Page 154
3. Move the pulse wheel to the transport position ................................................................ Page 124
4. Move the tramline markers to the transport position ........................................................ Page 156
5. Move the exact following harrow into transport position ................................................... Page 146
6. Move the road safety bar of the exact following harrow into transport position ............... Page 158
7. Empty the seed hopper if one of the permissible values for the total tractor weight,
axles loads and tyre load-bearing capacity is exceeded when the seed hopper is
full, see also section "Checking the suitability of the tractor", page 84 ............................ Page 170
8. Close the seed hopper cover.
9. Fold up the steps .............................................................................................................. Page 122
10. Switch off the control terminal, see the "Control terminal" operating manual
11. Check the lighting system and warning signs for proper function and cleanliness ............ Page 42
12. Check that the parking supports have been removed.
The parking supports do not have a locking device. When transporting the
combination, they can accidentally wander out of the mounts and cause serious
accidents.
13. Disable the tractor control units required for operating the implement,
see also tractor operating manual ...................................................................................... Page 40
14. Read and observe section 9.2:
Legal guidelines and the safety instructions before and during road transport.
15. Switch on the warning beacon and check operation before driving off ............................ Page 160