manualshive.com logo in svg

Amazone AD 3000 Super Classic Line, Operating Manual

Share
Download
Amazone AD 3000 Super Classic Line Operating Manual Download Page 70

 

 

 

Structure and function 

 

 

70 

 

AD 3000 Super  BAH0107-0  02.20

 

5.10 

Exact following harrow 

The exact following harrow (Fig. 60/1) evenly 
covers the seeds deposited in the seed furrows 
with loose earth and smoothes the ground. 

 

 

Fig. 60 

The following are adjustable 

 

the exact following harrow tine setting 

 

the exact following harrow pressure. 

 

The exact following harrow pressure 
determines the tillage intensity of the exact 
following harrow and depends on the soil 
texture. 

 

Before driving in reverse, always life the seed 
drill and pay attention to obstacles. Stop 
immediately if there is a collision while driving in 
reverse. If a slight collision occurs, the exact 
following harrow tines deflect upwards from the 
obstacle without being damaged, see Fig. 61.  

When driving forwards, the exact following 
harrow tines return to working position. 

 

 

Fig. 61 

Summary of Contents for AD 3000 Super Classic Line







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands