manualshive.com logo in svg

Amazone AD 3000 Super Classic Line, Operating Manual

Share
Download
Amazone AD 3000 Super Classic Line Operating Manual Download Page 51

 

 

 

Structure and function

 

AD 3000 Super  BAH0107-0  02.20

 

51

 

The roller (Fig. 24/C) serves to reconsolidate the soil. AMAZONE provides the suitable roller for any 
seed type and any soil. The seed drill may only be combined with the approved AMAZONE rollers, see 
section "Approved AMAZONE implement combinations", page 44. 

 

The 

AMAZONE PW tooth packer roller

 has 

good self-propulsion and with its on-grip teeth, it 
achieves full-area reconsolidation of the surface. 
The tooth packer roller is designed for universal 
use. 

 

 

Fig. 25 

The 

AMAZONE KW wedge ring roller

 has a 

wide range of applications. 

Its design enables reconsolidation in strips on 
virtually all soils and under all conditions. 

 

 

Fig. 26 

Summary of Contents for AD 3000 Super Classic Line







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands