Amazone AD 3000 Super Classic Line, Operating Manual

Page: 145 / 198

Settings
AD 3000 Super BAH0107-0 02.20
145
8.8.2 Hydr. coulter pressureadjustment
WARNING
Direct people out of the danger area of the hydraulically
operated components.
1. Actuate the control valve (green).

Apply pressure to the hydraulic cylinder.
2. Apply the parking brake, switch the tractor
engine off and remove the ignition key.
3. Insert the pin (Fig. 178/1) below the stop
(Fig. 178/3) into a hole in the group of holes
and secure it with a linch pin (Fig. 178/2).
Fig. 178
Each of the holes is identified with a number.
The greater the number of holes into which the
pin is inserted, the greater the coulter pressure
or respectively the seed placement depth.
4. Put the control valve (green) to the float
position.
Setting the coulter pressure higher
1. Put the control valve (green) to the float
position.
2. Apply the parking brake, switch the tractor
engine off and remove the ignition key.
3. Insert the bolt (Fig. 179/1) above the stop
(Fig. 179/3) into a hole in the group of holes
and secure it with a linch pin (Fig. 179/2).
Fig. 179