Chapter
4
37
ML-7 Series/ML-9001A
4.3 Air Filter Inspection and Replacement
2
To remove the fixtures holding the filter
in place, spread the four ends of the
fixtures (circled in the figure) in the
directions shown by the arrows.
3
Remove the air filter from the cover.
Clean the filter with a mild detergent and
allow it to dry completely.
4
Attach the air filter to the front cover.
Insert the center part of the fixtures
(shown inside squares in the figure).
Secure the air filter in the four corners of
the fixtures.
5
Attach the front cover to the Control Unit.
■
ML-7112AH
1
Remove the front cover by unscrewing
the screw under the cover and lifting the
cover up.
Fixture
Front cover
Air filter
Screw
Front cover
Summary of Contents for ML-7 Series
Page 4: ......
Page 8: ...4 ML 7 Series ML 9001A Contents...
Page 82: ...Chapter 4 78 ML 7 Series ML 9001A Chapter 4 Maintenance...
Page 83: ...Appendix...