Amada MEA-100B, Operation Manual, Page: 33 / 87

MEA-100B
8. Stepper-Up Function
8-2
(2) Stepper Count and Current Settings
The stepper-up (-down) function is performed when the weld count reaches the set
value.
Stepper-Up Operation Chart
N1–5: Stepper count
S2–5: Stepper-up (-down) rate
ATTENTION
Check the Weld Force No. ([SOL]) before changing this setting.
Setting Stepper Count

Press the [MENU] key to move to the Stepper Count Setting Screen.

Press the [

] key to move the cursor to "a" above and select the welding head
from SOL1 and SOL2.

Move the cursor to "b" and select the stepper number.
There are 5 stepper numbers, #1 (stepper 1) to #5 (stepper 5).

Move the cursor to "c" and set the stepper counts (the weld counts) for each
stepper number.
There are 5 stepper numbers, #1 (stepper 1) to #5 (stepper 5).
S2
S3
S4
S5
Stepper-up completed
N5 N1 N2 N3 N4
Stepper count
Set current
1 2 3 4 5 Stepper No.
Current
W e l d c o u n t [ t i m e s ]
[kA]
ＳＴＥＰ ＣＯＵＮＴ
ＳＯＬ１
ＳＴＥＰ ♯１ ００００
ａ ｂ ｃ