Amada 1000ADP, Operation Manual

Page: 89 / 112

APPENDIX D: COMMUNICATIONS
125ADP/300ADP/1000ADP DUAL PULSE RESISTANCE WELDING POWER SUPPLY
990-922 D-7
SCHEDULE “SS” Set <ACK OR NAK> 1 Byte
SCHEDULE “SR” Read
SCHEDULE # , 2 Bytes
SQZ #, (Squeeze Time), 4 Bytes
WS #1, (Energy in Watt Seconds), 3 Bytes
WS #2, (Energy in Watt Seconds), 3 Bytes
HOLD #, (Hold Time), 4 Bytes
PULSE1, ( weld length ), 1 Byte
PULSE2, ( weld length ), 1 Byte
POLARITY1, ( weld polarity ), 1 Byte
POLARITY2, ( weld polarity ), 1 Byte
UP #, (Up Slope, 0=Off, 1=On), 1 Byte
21 Bytes Total
-----------------------------------------------------------------------
weld length 0=Very short, 1=Short, 2=Medium, 3=Long.
weld polarity 0=Positive, 1=Negative, 2=Alternating.
MONITOR “MS”
Set <ACK OR NAK> 1 Byte
MONITOR
“MR” Read SCHEDULE #, 2 Bytes
P1 Upper Limit, 4 Bytes
P1 Lower Limit, 4 Bytes
P1 Action ( action ) 1 Byte
P2 Upper Limit 4 Bytes
P2 Lower Limit 4 Bytes
19 Bytes Total
-------------------------------------------------------------------------
action 0 = NONE, 1 = INHIBIT P2