Amada 1000ADP, Operation Manual

Page: 16 / 112

CHAPTER 1: DESCRIPTION
125ADP/300ADP/1000ADP DUAL PULSE RESISTANCE WELDING POWER SUPPLY
1-2 990-922

Two
air valve drivers
are provided for sequential control of two separate air operated weld heads,
when desired. As shipped, Air Valve Driver 2 is configured for 24 VAC weld head operation, but
may be reconfigured for 24VDC compatibility when required. See
Appendix B, Electrical & Data
Connections
for details on how to make this conversion. Air Valve Driver 1 is
only
compatible for
24VDC.

Remote schedule selection
simplifies use in automated systems
. The
CONTROL SIGNALS
connector provides remote control capability for
EMERGENCY STOP
,
REMOTE WELD INHIBIT
, and
REMOTE WELD SCHEDULE SELECTION
.

The
CHAIN SCHEDULE
feature allows consecutive schedules to be chained together.

An
advanced charging circuit
provides rapid recharging and greater throughput.
Display Screens
Large, remarkably intuitive screens, allow the user to see everything at a glance. See
Chapter 3, Using
Display Screens
for complete instructions. Briefly, the
RUN
screen is BLUE , welds within limits display
GREEN , and welds out of limits display RED as indicated below.
Pulse 1 & Pulse 2 Limits OFF Pulse 1 Out of Limits / Pulse 2 Within Limits