Amada 1000ADP, Operation Manual

Page: 25 / 112

125ADP/300ADP/1000ADP DUAL PULSE RESISTANCE WELDING POWER SUPPLY
990-922 2-1
CHAPTER 2
Installation and Setup
Section I: Installation
Unpacking
When you unpack the shipping container, be sure that the contents of the shipping kit match the list in
Appendix A, Technical Specifications
and that you have also received the accessories you ordered.
If the Power Supply shows any signs of shipping damage, promptly contact both the carrier and Amada
Miyachi America Customer Service. See
CONTACT US
in the front of this manual to get in touch with us
by e-mail, telephone, or regular mail.
Space Requirements

Allow ample workspace around the Power
Supply so that it will not be impacted
during operation.

Allow sufficient clearance around the sides
and back of the Power Supply to allow for
connecting cables.

Allow enough ventilation space so the
Power Supply does not overheat.
- 125ADP & 300ADP
:
Allow 1 inch
space on each side, 2 inches of space
in the rear.
- 1000ADP
:
Allow 1 inch space on
each side, 2 inches of space in the
rear.
-
1000ADP Weld Transformer :
Allow
1 inch on all sides of the transformer

The work surface must be level, stable, free from vibration, and capable of supporting the
combined weight of all system components. Weights are listed in
Appendix A, Technical
Specifications
.

Locate the Power Supply at a sufficient distance from weld heads so as to avoid weld splash.

Locate the Power Supply at a sufficient distance from sources of high-frequency radiation to
avoid electrical interference.

The work area must be free of excessive dust, acids, corrosive gases, salt and moisture.