Amada 1000ADP, Operation Manual

Page: 86 / 112

APPENDIX D: COMMUNICATIONS
125ADP/300ADP/1000ADP DUAL PULSE RESISTANCE WELDING POWER SUPPLY
D-4 990-922
SCHEDULE “SR” Read Schedule #. Reads current schedule data 2 Bytes
SCHEDULE “SS” Set
SCHEDULE #, 2 Bytes
SQZ #, (Squeeze Time), 4 Bytes
WS #1, (Energy in Watt Seconds), 3 Bytes
WS #2, (Energy in Watt Seconds), 3 Bytes
HOLD #, (Hold Time), 4 Bytes
PULSE1, ( weld length ), 1 Byte
PULSE2, ( weld length ), 1 Byte
POLARITY1, ( weld polarity ), 1 Byte
POLARITY2, ( weld polarity ), 1 Byte
UP #, (Up Slope, 0=Off, 1=On), 1 Byte
21 Bytes Total
-----------------------------------------------------------------------
weld length 0=Very short, 1=Short, 2=Medium, 3=Long.
weld polarity 0=Positive, 1=Negative, 2=Alternating.
Note: The “SS” Set commands for PULSE1, PULSE2, POLARITY1, and POLARITY2 do not apply to
the 1000ADP
LIMITS “MR”
Read Schedule # 2 Bytes
LIMITS
“MS” Set SCHEDULE #, 2 Bytes
P1 Upper Limit, 4 Bytes
P1 Lower Limit, 4 Bytes
P1 Action ( action ) 1 Byte
P2 Upper Limit 4 Bytes
P2 Lower Limit 4 Bytes
19 Bytes Total
-------------------------------------------------------------------------
action 0 = NONE, 1 = INHIBIT P2
SYSTEM
“YR” Read none 0 Bytes
SYSTEM “YS”
Set BAUD RATE (rate) 1 Byte
DEBOUNCE (0=None, 1=30ms) 1 Byte
BUZZER (0=Off, 1, 2, 3=loud) 1 Byte
FAST WELDING (0=Off, 1= On) 1 Byte
REMOTE (0=Off, 1= On) 1 Byte
CHAINING START, (0=Off, 01-63) 2 Bytes
CHAINING END (0=Off, 01-63) 2 Bytes
9 Bytes Total
-------------------------------------------------------------------------
rate 0=9600, 1=19.2 k, 2=38.4 k Baud