KN1000 User Manual
42
Log Server
Important transactions that occur on the KN1000, such as logins and internal
status messages, are kept in an automatically generated log file
Specify the MAC address of the computer that the Log Server runs on in
the
MAC address
field.
Specify the port used by the computer that the Log Server runs on to listen
for log details in the
Port
field. The valid port range is 1–65535. The
default port number is 9001.
Note:
The port number must different than the one used for the
Program
port (see
Program
, page 38).
See Chapter 8,
The Log Server
, for details on setting up the log server. The Log
File is discussed on page 121.
SNMP Server
To be notified of SNMP trap events, do the following:
1. Check
Enable SNMP Agent
.
2. Key in the IP address and the port number of the computer to be notified of
SNMP trap events. The valid port range is 1-65535.
Note:
The following SNMP trap events are sent: System Power On, Login
Failure, and System Reset.
Summary of Contents for KN1000
