Altusen KN1000, User Manual

Page: 99 / 194

5. The WinClient Viewer
85
After creating your macros, you can run them in any of three ways:
1. By using the hotkey (if one was assigned).
2. By opening the Macro List on the Control Panel and clicking the one you
want (see Macro List , page 78).
3. By opening this dialog box and clicking Play .
If you run the macro from this dialog box, you
have the option of specifying how the macro runs.
Š
If you choose Play Without Wait , the macro
runs the keypresses one after another with no time delay between them.
Š
If you choose Play With Time Control , the macro waits for the amount of
time between key presses that you took when you created it. Click on the
arrow next to
Play to make your choice.
Š
If you click Play without opening the list, the macro runs with the default
choice. The default choice ( NoWait or TimeCtrl ), is shown in the Playback
column.
You can change the default choice by clicking on the current choice
(
NoWait in the screenshot above), and selecting the alternative choice.
Note: 1. Information about the Search function is given on page 86.
2. User Macros are stored on the Local Client computer of each user.
Therefore there is no limitation on the of number of macros, the size
of the macro names, or makeup of the hotkey combinations that
invoke them