Altusen KN1000, User Manual

Page: 49 / 194

35
Chapter 4
Administration
Introduction
The administration utilities, represented by the icons located across the top of
the KN1000 web page, are used to configure the KN1000’s operating
environment.
This chapter discusses each of them in turn.
Note: 1. As you make your configuration changes in each dialog box, click
Apply to save them.
2. Some configuration changes only take effect after a KN1000 reset.
For those changes, a check is automatically put in the Reset on Exit
box (see Customization , page 66). To have the changes take effect,
log out and then log back in again.
3. If you don't have Configuration privileges (see User Management ,
page 57), the Administration configuration dialogs are not available.