Altusen KN1000, User Manual

Page: 55 / 194

4. Administration
41
SMTP Settings
To have the KN1000 email reports from the SMTP server to you, do the
following:
1. Enable the Enable report from the following SMTP server , and key in the
IP address of your SMTP server.
2. If your server requires authentication, put a check in the Server requires
authentication checkbox, and key in the appropriate account information
in the Account Name and Password fields.
3. Key in the email address of where the report is being sent from in the From
field.
Note: 1. Only one email address is allowed in the From field, and it cannot
exceed 64 Bytes.
2. 1 Byte = 1 English alphanumeric character.
4. Key in the email address (addresses) of where you want the SMTP reports
sent to in the To field.
Note: 1. If you are sending the report to more than one email address,
separate the addresses with a semicolon. The total cannot exceed
256 Bytes.
2. 1 Byte = 1 English alphanumeric character.
5. Select the report options you would like sent. Choices include: Report IP
address , Report system reboot , Report user login and Report user logout .