Altusen KN1000, User Manual

Page: 164 / 194

KN1000 User Manual
150
extension cord ampere rating. Make sure that the total of all products
plugged into the wall outlet does not exceed 15 amperes.
Š
To help protect your system from sudden, transient increases and
decreases in electrical power, use a surge suppressor, line conditioner, or
un-interruptible power supply (UPS).
Š
Position system cables and power cables carefully; Be sure that nothing
rests on any cables.
Š
When connecting or disconnecting power to hot-pluggable power
supplies, observe the following guidelines:
Š
Install the power supply before connecting the power cable to the
power supply.
Š
Unplug the power cable before removing the power supply.
Š
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cables from the power supplies.
Š
Never push objects of any kind into or through cabinet slots. They may
touch dangerous voltage points or short out parts resulting in a risk of fire
or electrical shock.
Š
Do not attempt to service the device yourself. Refer all servicing to
qualified service personnel.
Š
If the following conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair.
Š
The power cord or plug has become damaged or frayed.
Š
Liquid has been spilled into the device.
Š
The device has been exposed to rain or water.
Š
The device has been dropped, or the cabinet has been damaged.
Š
The device exhibits a distinct change in performance, indicating a need
for service.
Š
The device does not operate normally when the operating instructions
are followed.
Š
Only adjust those controls that are covered in the operating instructions.
Improper adjustment of other controls may result in damage that will
require extensive work by a qualified technician to repair.
Š
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
Š
Inlet power cord selection: Detachable, maximum 2.0 m long, 18 AWG,
flexible cord (125V, 10A, 3C, NEMA 5-15P). Or, 0.75mm
2
, 3G, flexible
cord (E.g.: H05VV-F, 250V 10A).