Altusen KN1000, User Manual

Page: 52 / 194

KN1000 User Manual
38
(Continued from previous page.)
An explanation of the fields is given in the table below:
Note: 1. Valid entries for all of the Service Ports are from 1–65535.
2. The service ports cannot have the same value. You must set a
different value for each one.
3. If there is no firewall (on an Intranet, for example), it doesn’t matter
what these numbers are set to, since they have no effect.
IP Address
The KN1000 can either have its IP address assigned dynamically at bootup
(DHCP), or it can be given a fixed IP address.
Š
For dynamic IP address assignment, select the Obtain an IP address
automatically , radio button. (This is the default setting.)
Š
To specify a fixed IP address, select the Set IP address manually , radio
button and fill in the IP address.
Note: 1. If you choose Obtain IP address automatically , when the switch starts
up it waits to get its IP address from the DHCP server. If it hasn’t
obtained the address after one minute, it automatically reverts to its
factory default IP address (192.168.0.60.)
2. If the KN1000 is on a network that uses DHCP to assign network
addresses, and you need to ascertain its IP address, see IP Address
Determination , page 153, for information.
Field Explanation
HTTP The port number for a browser login. The default is 80.
HTTPS The port number for a secure browser login. The default is 443.
Telnet Port The port for Telnet access. The default is 23.
Program This is the port number for connecting to the KN1000 from the
Windows Client and Java Applet Viewers, and from the Windows
and Java AP programs. The default is 9000.
Virtual Media This is the port number used for data transfer using the KN1000’s
virtual media feature. Valid entries are from 1–65535. The default is
9003.
SSH Port The port for SSH access. The default is 22.