Allied Telesis x510-28GPX, Command Reference Manual

Page: 315 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 315
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
LUGGABLES AND
C
ABLING
C
OMMANDS
SHOW SYSTEM PLUGGABLE DETAIL
show system pluggable detail
Overview This command displays detailed pluggable transceiver information showing the
pluggable type, the pluggable serial number, and the pluggable port on the
device. Different types of pluggable transceivers are supported in different models
of device. See your Allied Telesis dealer for more information about the models of
pluggables that your device supports.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Syntax show system pluggable [< port-list >] detail
Mode User Exec and Privileged Exec
Usage In addition to the information about pluggable transceivers displayed using the
show system pluggable command (port, manufacturer, serial number,
manufacturing datecode, and type information), the show system pluggable
detail command displays the following information:
• SFP Laser Wavelength : Specifies the laser wavelength of the installed
pluggable transceiver
• Single mode Fiber : Specifies the link length supported by the pluggable
transceiver using single mode fiber
• OM1 (62.5 μ m) Fiber : Specifies the link length, in meters (m) or kilometers
(km) supported by the pluggable transceiver using 62.5 micron multi-mode
fiber.
• OM2 (50 μ m) Fiber : Specifies the link length (in meters or kilometers)
supported by the pluggable transceiver using 50 micron multi-mode fiber.
• Diagnostic Calibration : Specifies whether the pluggable transceiver
supports DDM or DOM Internal or External Calibration.
– Internal is displayed if the pluggable transceiver supports DDM or
DOM Internal Calibration.
– External is displayed if the pluggable transceiver supports DDM or
DOM External Calibration.
– a dash (-) is displayed if neither Internal Calibration or External
Calibration is supported.
Parameter Description
<port-list>
The ports to display information about. The port list can be:
• a switch port (e.g. port1.0.25)
• a continuous range of ports separated by a hyphen (e.g.
port1.0.27-1.0.28)
• a comma-separated list of ports and port ranges (e.g.
port1.0.25,port1.0.27-1.0.28)