Allied Telesis x510-28GPX, Command Reference Manual

Page: 679 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 679
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
S
PANNING
T
REE
C
OMMANDS
SPANNING
-
TREE MST INSTANCE
spanning-tree mst instance
Overview Use this command to assign a Multiple Spanning Tree instance (MSTI) to a switch
port or channel group.
Note that ports are automatically configured to send and receive spanning-tree
information for the associated MSTI when VLANs are assigned to MSTIs using the
instance vlan (MSTP) command.
Use the no variant of this command in Interface Configuration mode to remove the
MSTI from the specified switch port or channel group.
Syntax
spanning-tree mst instance < instance-id >
no spanning-tree mst instance < instance-id >
Default A port automatically becomes a member of an MSTI when it is assigned to a VLAN.
Mode Interface Configuration mode for a switch port or channel group.
Usage You can disable automatic configuration of member ports of a VLAN to an
associated MSTI by using a
no spanning-tree mst instance command to remove
the member port from the MSTI. Use the spanning-tree mst instance command
to add a VLAN member port back to the MSTI.
Examples To assign instance 3 to a switch port, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# spanning-tree mst instance 3
To remove instance 3 from a switch port, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no spanning-tree mst instance 3
Related
Commands
instance vlan (MSTP)
spanning-tree mst instance path-cost
spanning-tree mst instance priority
spanning-tree mst instance restricted-role
spanning-tree mst instance restricted-tcn
Parameter Description
< instance-id >
Specify an MSTP instance in the range 1-15. The MST instance must
have already been created using the
instance vlan (MSTP)
command.