Allied Telesis x510-28GPX, Command Reference Manual

Page: 2797 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 2797
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
ING
-P
OLLING
C
OMMANDS
SHOW PING
-
POLL
Examples To display the ping poll settings and the status of all the polls, use the command:
awplus# show ping-poll
To display a summary of the ping poll settings, use the command:
awplus# show ping-poll brief
To display the settings for ping poll 6, use the command:
awplus# show ping-poll 6
To display a summary of the state of ping poll 6, use the command:
awplus# show ping-poll 6 brief
To display the settings of ping polls that have reachable devices, use the
command:
awplus# show ping-poll state up
To display a summary of ping polls that have unreachable devices, use the
command:
awplus# show ping-poll 6 state down brief
Related
Commands
debug ping-poll
ping-poll
Fail count
The number of pings that must be unanswered, within the total
number of pings specified by the
sample-size command, for the
polling instance to consider the device unreachable. This is set
using the
fail-count command.
Up count
The number of consecutive pings that the polling instance must
receive a reply to before classifying the device reachable again.
This is set using the
up-count command.
Sample size
The total number of pings that the polling instance inspects
when determining whether a device is unreachable. This is set
using the
sample-size command.
Length
The number of data bytes to include in the data portion of the
ping packet. This is set using the
length (ping-poll data)
command.
Timeout
The time in seconds that the polling instance waits for a
response to a ping packet. This is set using the
timeout (ping
polling) command.
Debugging
Indicates whether ping polling debugging is Enabled or
Disabled .
This is set using the debug ping-poll command.
Table 67: Parameters in output of the show ping-poll command (cont.)
Parameter Description