C613-50170-01 Rev B
Command Reference for x510 Series
1907
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
L
OCAL
RADIUS S
ERVER
C
OMMANDS
ATTRIBUTE
In the same way, where the specific attribute has a pre-defined value, the
parameter
<value>
may be substituted with the Value Name or with its numeric
value, for example the command:
awplus(config-radsrv-group)#
attribute acct-terminate-cause
user-request
will produce the same results as the command:
awplus(config-radsrv-group)#
attribute 49 1
or the command:
awplus(config-radsrv-group)#
attribute acct-terminate-cause 1
Examples
To check a list of all available defined RADIUS attribute names, use the following
commands:
awplus#
configure terminal
awplus(config)#
radius-server local
awplus(config-radsrv)#
group Admin
awplus(config-radsrv-group)#
attribute help
A list of Vendor-specific Attributes displays after the list of defined Standard
Attributes.
To get help for valid RADIUS attribute values for the attribute
Service-Type
,
use the following commands:
awplus#
configure terminal
awplus(config)#
radius-server local
awplus(config-radsrv)#
group Admin
awplus(config-radsrv-group)#
attribute Service-Type help
This results in the following output:
Service-Type : integer (Integer number)
Pre-defined values :
Administrative-User (6)
Authenticate-Only (8)
Authorize-Only (17)
Callback-Administrative (11)
Callback-Framed-User (4)
Callback-Login-User (3)
Callback-NAS-Prompt (9)
Call-Check (10)
Framed-User (2)
Login-User (1)
NAS-Prompt-User (7)
Outbound-User (5)
