C613-50170-01 Rev B
Command Reference for x510 Series
1292
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
M
ULTICAST
C
OMMANDS
DEBUG
NSM
MCAST
6
debug nsm mcast6
Overview
Use this command to debug IPv6 events in the Multicast Routing Information Base
(MRIB).
This command is intended for use by Allied Telesis authorized service personnel
for diagnostic purposes.
Syntax
debug nsm mcast6 {all|fib-msg|mrt|register|stats|vif}
no debug nsm mcast6 {all|fib-msg|mrt|register|stats|vif}
Mode
Privileged Exec and Global Configuration
Examples
To enable debugging of all multicast route events, use the commands:
awplus#
configure terminal
awplus(config)#
debug nsm mcast6 all
To enable debugging of PIM register entries, use the commands:
awplus#
configure terminal
awplus(config)#
debug nsm mcast6 register
Parameter
Description
all
All IPv6 multicast route debugging.
fib-msg
Forwarding Information Base (FIB) messages.
mrt
Multicast routes.
register
Multicast PIM register messages.
stats
Multicast statistics.
vif
Multicast interfaces.
