C613-50170-01 Rev B
Command Reference for x510 Series
1461
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-DM C
OMMANDS
SHOW
IP
PIM
DENSE
-
MODE
NEXTHOP
show ip pim dense-mode nexthop
Overview
This command displays the next hop information as used by PIM-DM. In the
context of PIM-DM, the term ‘
next hop
’ refers to the next hop router on the path
back to the source address of a multicast stream.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show ip pim dense-mode nexthop
Mode
User Exec and Privileged Exec
Example
awplus#
show ip pim dense-mode nexthop
Output
Figure 35-7:
Example output from the
show ip pim dense-mode neighbor
nexthop
command
Destination Nexthop Nexthop Nexthop Metric Pref
Num Addr Interface
192.168.10.52 1 0.0.0.0 vlan2 3 1
Table 2:
Parameters in the output of the
show ip pim dense-mode neighbor
nexthop
command
Parameter
Description
Destination
Destination address for which PIM-DM requires next hop
information.
Nexthop Num
Number of next hops to the destination. PIM can only use
one next hop.
Nexthop Addr
Address of the current next hop gateway.
Nexthop Interface
Name of the next hop interface.
Metric
Metric of the route towards the destination.
Preference
Preference of the route towards the destination.
