C613-50170-01 Rev B
Command Reference for x510 Series
1333
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-SM C
OMMANDS
IP
PIM
CRP
-
CISCO
-
PREFIX
ip pim crp-cisco-prefix
Overview
Use this command to interoperate with Cisco devices that conform to an earlier
draft standard. Some Cisco devices might not accept candidate RPs with a group
prefix number of zero. Note that the latest BSR specification prohibits sending RP
advertisements with prefix 0. RP advertisements for the default IPv4 multicast
group range 224/4 are sent with a prefix of 1.
Use the
no
variant of this command to revert to the default settings.
Syntax
ip pim crp-cisco-prefix
no ip pim crp-cisco-prefix
Mode
Global Configuration
Usage
Cisco’s BSR code does not conform to the latest BSR draft. It does not accept
candidate RPs with a group prefix number of zero. To make the candidate RP work
with a Cisco BSR, use the
ip pim crp-cisco-prefix
command when interoperating
with older versions of Cisco IOS.
Example
awplus#
configure terminal
awplus(config)#
ip pim crp-cisco-prefix
awplus#
configure terminal
awplus(config)#
no ip pim crp-cisco-prefix
Related
Commands
