Allied Telesis x510-28GPX, Command Reference Manual

Page: 2148 / 2822

52
C613-50170-01 Rev B Command Reference for x510 Series 2148
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Ethernet Protection
Switched Ring
(EPSRing™)
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Ethernet Protection Switched Ring (EPSRing™). For more information, see the
EPSR
Feature Overview and Configuration Guide .
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Command List • “ debug epsr ” on page 2150
• “ epsr ” on page 2151
• “ epsr configuration ” on page 2153
• “ epsr datavlan ” on page 2154
• “ epsr enhancedrecovery enable ” on page 2155
• “ epsr mode master controlvlan primary port ” on page 2156
• “ epsr mode transit controlvlan ” on page 2157
• “ epsr priority ” on page 2158
• “ epsr state ” on page 2159
• “ epsr topology-change ” on page 2160
• “ epsr trap ” on page 2161
• “ show debugging epsr ” on page 2162
• “ show epsr ” on page 2163
• “ show epsr common segments ” on page 2168
• “ show epsr config-check ” on page 2169
• “ show epsr <epsr-instance> ” on page 2170
• “ show epsr <epsr-instance> counters ” on page 2171
• “ show epsr counters ” on page 2172