C613-50170-01 Rev B
Command Reference for x510 Series
2240
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
ATMF
BACKUP
ENABLE
atmf backup enable
Overview
This command enables automatic AMF backups on the AMF master node that you
are connected to. By default, automatic backup starts at 3:00 AM. However, this
schedule can be changed by the
command. Note that backups are
initiated and stored only on the master nodes.
Use the
no
variant of this command to disable any AMF backups that have been
scheduled and previously enabled.
Syntax
atmf backup enable
no atmf backup enable
Default
Automatic AMF backup functionality is enabled on the AMF master when it is
configured and external media, i.e. an SD card or a USB storage device or remote
server, is detected.
Mode
Global Configuration
Usage
A warning message will appear if you run the
command with
either insufficient or marginal memory availability on your external storage device.
on page 2350 to check the amount
of space available on your external storage device.
We recommend using the ext3 or ext4 filesystem on external media that are used
for AMF backups.
Example
To turn on automatic AMF backup, use the following command:
AMF_Master_1#
configure terminal
AMF_Master_1(config)#
atmf backup enable
Related
Commands
