Allied Telesis x510-28GPX, Command Reference Manual

Page: 495 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 495
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
I
NTERFACE
T
ESTING
C
OMMANDS
CLEAR TEST INTERFACE
clear test interface
Overview This command clears test results and counters after issuing the test interface
command. Test results and counters must be cleared before executing subsequent
test interface commands.
Syntax
clear test interface {< port-list >|all}
Mode Privileged Exec
Examples To clear the counters for
port1.0.1
use the command:
awplus# clear test interface port1.0.1
To clear the counters for all interfaces use the command:
awplus# clear test interface all
Related
Commands
test interface
Parameter Description
< port-list >
The ports to test. A port-list can be:
• a switch port (e.g.
port1.0.6
)
• a continuous range of ports separated by a hyphen, e.g.
port1.0.1-port1.0.6
• a comma-separated list of the above, e.g.
port1.0.1,port1.0.5-1.0.6
The specified ports must exist.
all
All interfaces