C613-50170-01 Rev B
Command Reference for x510 Series
1417
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-SM
V
6 C
OMMANDS
SHOW
IPV
6
PIM
SPARSE
-
MODE
INTERFACE
DETAIL
show ipv6 pim sparse-mode interface detail
Overview
Use this command to show detailed PIM-SMv6 information for all PIM-SMv6
configured interfaces.
For information on filtering and saving command output, see the
“Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide
.
Syntax
show ipv6 pim sparse-mode interface detail
Mode
User Exec and Privileged Exec
Example
To show detailed PIM-SMv6 information for all PIM-SMv6 configured interfaces,
use the command:
awplus#
show ipv6 pim sparse-mode interface detail
Output
Figure 34-4:
Example output from the
show ipv6 pim sparse-mode interface
detail
command
awplus#show ipv6 pim sparse-mode interface detail
vlan2 (vif 0)
Address fe80::207:e9ff:fe02:81d, DR fe80::20e:cff:fe01:facc
Hello period 30 seconds, Next Hello in 21 seconds
Triggered Hello period 5 seconds
Secondary addresses:
3ffe:192:168:1::53
Neighbors:
fe80::202:b3ff:fed4:69fe
fe80::20e:cff:fe01:facc
vlan3 (vif 2):
Address fe80::207:e9ff:fe02:21a2, DR fe80::207:e9ff:fe02:21a2
Hello period 30 seconds, Next Hello in 20 seconds
Triggered Hello period 5 seconds
Secondary addresses:
3ffe:192:168:10::53
Neighbors:
