C613-50170-01 Rev B
Command Reference for x510 Series
2364
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW
ATMF
GROUP
This confirms that the six nodes (
node1
to
node6
) are now members of the
working-set and that these nodes reside within the
AMF-NETWORK
.
Note that to run this command, you must have previously entered the command
on page 2312. This can be seen from the network level prompt,
which in this case is
AMF_NETWORK[6]#
.
ATMF group information
master, poe, x8100
===============================================
node1, node2, node3, node4, node5, node6:
===============================================
ATMF group information
sysadmin, x8100
AMF_NETWORK[6]#
Table 56:
Sample output from the
show atmf group
command for a working
set.
AMF_NETWORK[6]#show atmf group
===============================
node3, node4, node5, node6:
===============================
ATMF group information
edge_switches, x510
Table 57:
Parameter definitions from the
show atmf group
command for a
working set
Parameter
Definition
ATMF group information
Displays a list of nodes and the groups that they
belong to, for example:
•
master - Shows a common group name for Nodes
configured as AMF masters.
•
Hardware Arch - Shows a group for all Nodes
sharing a common Hardware architecture, e.g.
x8100, x230, for example.
•
User-defined - Arbitrary groups created by the
user for AMF nodes.
