C613-50170-01 Rev B
Command Reference for x510 Series
313
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
LUGGABLES
AND
C
ABLING
C
OMMANDS
SHOW
SYSTEM
PLUGGABLE
show system pluggable
Overview
This command displays
brief
pluggable transceiver information showing the
pluggable type, the pluggable serial number, and the pluggable port on the
device. Different types of pluggable transceivers are supported in different models
of device. See your Allied Telesis dealer for more information about the models of
pluggables that your device supports.
Syntax
show system pluggable [<
port-list
>]
Mode
User Exec and Privileged Exec
Example
To display brief information about all installed pluggable transceivers, use the
command:
awplus#
show system pluggable
Example
To display brief information about pluggable transceivers installed in port1.0.25
through port1.0.26, use the command:
awplus#
show system pluggable port1.0.25-1.0.26
Output
Figure 8-3:
Example output from
show system pluggable port1.0.25-1.0.26
Parameter
Description
<port-list>
The ports to display information about. The port list can be:
•
a switch port (e.g. port1.0.25)
•
a continuous range of ports separated by a hyphen (e.g.
port1.0.27-1.0.28)
•
a comma-separated list of ports and port ranges (e.g.
port1.0.25,port1.0.27-1.0.28)
System Pluggable Information
Port Manufacturer Device Serial Number Datecode Type
--------------------------------------------------------------------------------
1.0.25 AGILENT HFBR-5710L 0401312315461272 040131 1000BASE-SX
1.0.26 AGILENT QBCU-5730R AK0614GKF7 060408 1000BASE-T
--------------------------------------------------------------------------------
Table 9:
Parameters in the output from the
show system pluggable
command
Parameter
Description
Stack member
The stack member number.
Port
Specifies the port number for the installed pluggable
transceiver.
