Allen-Bradley 1407-CGCM, User Manual, Page: 87 / 252

Rockwell Automation Publication 1407-UM001H-EN-P - November 2014
CGCM Unit Configuration #HAPTER
•
The tags listed below determine the points shown in the UEL
configuration diagrams below. These tags are in the configuration table
and are set by the like-named fields in the UEL tab. VAR values are actually
negative, indicating leading. Configure the VAR and Watt tags with
increasing real power values in point 1 through point
x
. These tags define
the curve breakpoints. As shown, the curve continues horizontally left
from point 1 and vertically up from point 5. The tags are expressed in
Watts or VARs respectively.
– Point 1 is defined by tags UEL_Curve_W_Pt1 and
UEL_Curve_VAR_Pt1
– Point 2 is defined by tags UEL_Curve_W_Pt2 and
UEL_Curve_VAR_Pt2
– Point 3 is defined by tags UEL_Curve_W_Pt3 and
UEL_Curve_VAR_Pt3
– Point 4 is defined by tags UEL_Curve_W_Pt4 and
UEL_Curve_VAR_Pt4
– Point 5 is defined by tags UEL_Curve_W_Pt5 and
UEL_Curve_VAR_Pt5
•
Validate and Graph button – Updates the graph in the UEL tab after
entering new values.
Related Parameters
•
UEL_En tag in the Output table
2EAL0OWER7ATTS
2EACTIVE0OWER
6
!2S