Allen-Bradley 1407-CGCM, User Manual, Page: 108 / 252

Rockwell Automation Publication 1407-UM001H-EN-P - November 2014
#HAPTER CGCM Unit Startup
2ECOMMENDED%QUIPMENT
You need the following equipment to help in the startup of the CGCM unit.
0ROGRAMMING4ERMINAL
A suitable programming terminal (typically a notebook personal computer) with
RSLinx, RSLogix 5000, and RSNetWorx for ControlNet software is required.
The programming terminal must be equipped with a suitable interface to support
communication with the Logix controller. A typical communication interface
can be a ControlNet network interface card (catalog number 1784-PCC) and its
cable.
4WOCHANNEL#HART2ECORDEROR/THER3UITABLE$ATA2ECORDING
-ETHOD
A two-channel recorder or other suitable method is recommended for the
verification procedure. Chart recorder connections vary depending on the test
being performed.
!44%.4)/.
Electrostatic discharge can damage integrated circuits or
semiconductors. Follow these guidelines when you handle the module.
Touch a grounded object to discharge static potential.
•
Wear an approved wrist strap-grounding device.
•
Do not open the module or attempt to service internal components.
•
If available, use a static safe workstation.
•
When not in use, keep the module in its static shield bag.