Allen-Bradley 1407-CGCM, User Manual, Page: 139 / 252

Rockwell Automation Publication 1407-UM001H-EN-P - November 2014
CGCM Unit Software Interface #HAPTER
2 1 Bool 0 Spare2 - -
Bool 1 Spare3
Bool 2 EngineIdle Engine Idle 0=False, 1=True
Bool 3 Spare4
Bool 4 PF_VAR_Select Power Factor/VAR Select 0=PF, 1=VAR
Bool 5 PF_VAR_En Power Factor/VAR Enable 0=Disabled,
1=Enabled
Bool 6 AVR_FCR_Select Automatic Voltage
Regulator/Field Current Regulator
Select
0=AVR, 1=FCR
Bool 7 FltReset Fault Reset 0=De-assert,
1=Assert
3 1 Bool 0 AutoSyncEn Auto Synchronization Enable - 0=Disabled,
1=Enabled
Bool 1 CheckSyncEn Check Synchronization Enable
Bool 2 PermissiveSyncEn Permissive Synchronization
Enable
Bool 3 Spare5
Bool 4 Spare6
Bool 5 Bus A_B_Select Bus A/B Select 0=Bus A, 1=Bus B
Bool 6 DeadBusClosureEn Dead Bus Closure Enable 0=Disabled,
1=Enabled
Bool 7 InitiateSync Initiate Synchronization 0=Inactive, 1=Active
4 1 Bool 0 Clear_kW_Hrs (Rev. 2. X )
Set_kW_Hrs (Rev. 3. X or later)
Set/Clear kW Hours 0=De-assert,
1=Assert
Bool 1 Clear_kVAR_Hrs (Rev. 2. X )
Set_kVAR_Hrs (Rev. 3.
X
or later)
Set/Clear kVAR Hours
Bool 2 Clear_kVA_Hrs (Rev. 2.
X
)
Set_kVA_Hrs (Rev. 3.
X
or later)
Set/Clear kVA Hours
Bool 3 Spare7
Bool 4 Droop_CCC_Select Droop/Cross Current
Compensation Select
0=Droop, 1=CCC
Bool 5 V_DroopEn Voltage Droop Enable 0=Disabled,
1=Enabled
Bool 6 Spare8
Bool 7 SoftwareExcEn Software Excitation Enable 0=Disabled,
1=Enabled
4ABLE/UTPUTSCHEDULEDWRITE $ATA4ABLE!SSEMBLY)NSTANCE
"YTE 3IZE
IN
"YTES
4YPE "ITS 4AG.AME $ESCRIPTION 5NITS 2ANGE