Allen-Bradley 1407-CGCM, User Manual, Page: 76 / 252

Rockwell Automation Publication 1407-UM001H-EN-P - November 2014
#HAPTER CGCM Unit Configuration
The Unscheduled Write data tag must be written to the CGCM unit by using a
message instruction in the controller program.
Refer to Chapter 6 for more information on the program interface for CGCM
unit configuration.
#ONFIGURATION4ABS
Input the initial settings (parameters) to match your system application for each
of the configuration tabs as shown in the following paragraphs. Review the
settings and click OK when complete.
Descriptions for the configuration tabs labeled General, Connection, and
Module Info are provided in Logix5000 Controllers Common Procedures,
publication
1756-PM001 .
Each tab contains four action buttons at the bottom of the tab. These buttons
function as follows:
•
OK - Accepts the entered values for each screen and returns the user to the
previous screen.
•
Cancel - Exits the screen and returns the values to their previous values.
•
Apply - Applies the current settings without leaving the screen.
•
Help - Accesses the help menu.
RSLogix 5000 software performs configuration data checking as specified by the
limits shown in the data tables. The data checking verifies that the entry is within
range for the device, however, it does not verify that it is reasonable for the
application. You must be sure that the entry is reasonable for the specific
application. If you enter an out-of range parameter in a Configuration tab, a
message box reports the error and the appropriate limits.
Refer to Chapter 6 for information on the limits specified by the data tables.
7!2.).' Data limit checking does not ensure values are appropriate
for the application.