Allen-Bradley 1407-CGCM, User Manual, Page: 143 / 252

Rockwell Automation Publication 1407-UM001H-EN-P - November 2014
CGCM Unit Software Interface #HAPTER
5NSCHEDULED7RITE$ATA4ABLE
The Unscheduled Write data table contains gains and other configuration
parameters, that can be written to the CGCM unit by the ControlLogix
controller regardless of the excitation state.
Data in this Controller Tag is written by the host controller to the unit by using
unscheduled messaging controlled by the user program.
$ATA4YPE
The Unscheduled Write data table is automatically created by using the
appropriate module-defined data type depending on the CGCM unit firmware
revision.
!SSEMBLY/BJECT)NSTANCE5NSCHEDULED7RITE$ATA4ABLE
The Get Attributes Single service for instance 6 of the Assembly Object can
access the following information.
The Set Attributes Single service for instance 6 of the Assembly Object can access
the following information.
144 4 Real Exc_I Excitation Current Amps 0 15
148 4 Real ExcRipple_I (Rev.2.x)
ExcRipple (Rev. 3.x) Excitation Ripple Current Amps/% 0 15
152 4 Real kW_Hrs kW Hours kWh
-3.04 * 10
38
3.04 * 10
38
156 4 Real kVAR_Hrs kVAR Hours kVARh
-3.04 * 10
38
3.04 * 10
38
160 4 Real kVA_Hrs kVA Hours kVAh 0
3.04 * 10
38
164 4 Real V_AdjustOffset Voltage Adjust Offset % -10 10
168 2 INT Spare
170 2 INT Resvd Reserved
4ABLE5NSCHEDULED2EAD$ATA4ABLE!SSEMBLY)NSTANCE
"YTE 3IZEIN
"YTES
4YPE 4AG.AME $ESCRIPTION 5NITS 2ANGE
4ABLE'ET!TTRIBUTES3INGLESERVICECODEX%
.AME !TTRIBUTE)$ $ATA4YPE 6ALUE
Data 3 UINT See Unscheduled Write Data
Table, Assembly Instance 6
Size 4 UINT CGCM firmware 2.x = 64
CGCM firmware 3.x or 4.x = 72