Alamo Industrial Traxx RF, Operator'S Manual

Page: 5 / 212

To the Owner/Operator/Dealer
This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the
unit at all times. If you lose or damage this manual a free replacement manual can be obtained from an authorized
Alamo Industrial dealer or by down loading the manual from the Alamo Industrial website www.www.alamo-
industrial.com
BEFORE YOU START!! READ, UNDERSTAND, and FOLLOW the information provided in this manual, the AEM
Mower Safety manual and the tractor operator's manual carefully to learn how to operate and service your machine
properly. Failure to do so could result in personal injury to you and bystanders. All implements with moving parts
are potentially hazardous. Every effort has been made to ensure that the machine is safe but operators must avoid
engaging in unsafe practices and follow the written instructions provided. The manufacturer has designed this
machine to be used with all its safety equipment properly attached to minimize the chance of accidents.
SAFETY FIRST. Completely read and understand the safety section of this manual before operating this
equipment. Do not allow anyone to operate this equipment who has not fully read and understood this manual.
Contact your Dealer to explain any instructions that you do not fully understand.
The care you give your Alamo Industrial machine will greatly determine your satisfaction with its performance and
its service life. Carefully read and follow the instructions in this manual to provide you with a thorough
understanding of your new implement and its intended use and service requirements.
All references made in this manual to right, left, front, rear, top or bottom are as viewed facing the direction of
forward travel with the implement properly attached to the unit.
Replacement Parts information is located in a separate Parts Manual. Alamo Industrial mowers use balanced and
matched system components for blade carriers, blades, cuttershafts, knives, knife hangers, rollers, drivetrain
components, and bearings. These parts are made and tested to
Alamo Industrial specifications. Non-genuine "will
fit" parts do not consistently meet these specifications. The use of "will fit" parts may reduce mower performance,
void warranties, and present a safety hazard. Use genuine
Alamo Industrial mower parts for economy and safety.
For future reference, record your Alamo Industrial product model number and serial number.
Dealer Telephone Model Number
Owner Purchase Date: Serial Number