Alamo Industrial Traxx RF, Operator'S Manual

Page: 155 / 212

MAINTENANCE
TRAXX RF 04/14 Maintenance Section 5-11
© 2014 Alamo Group Inc.
MAINTENANCE
COOLANT CHECK
To check the coolant level open the lid with the
appropriate key, loosen the cap of the radiator (a)
slowly making vent the pressure and check with eyes
the level of the coolant; coolant level should be
roughly 1” above radiator fin. If the level is low fill the
radiator until the level returns to the ideal level.Re-
close the tap and the lid.
CHANGING ENGINE OIL AND FIL-
TER
The procedure for changing the engine oil and filter is as follows;
Oil Capacity: 7 Quarts with filter
Oil Type: CASTROL SYNTEC or CASTROL EDGE with SYNTEC, 5w40
• Park the machine on a firm level site.
• Remove drain plug and release the oil into a suitable container - ensure the container used has sufficient
capacity for the amount of oil.
• Once all the oil has been released, replace drain plug and torque to 25 lb-ft (34.5Nm).