Alamo Industrial Traxx RF, Operator'S Manual

Page: 120 / 212

OPERATION
TRAXX RF 04/14 Operation Section 4-14
© 2014 Alamo Group Inc.
OPERA
T
ION
All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors,
Steel Guards, Gearbox Shields, and Retractable Door Shields should be used and
maintained in good working condition. All safety devices should be inspected carefully at least daily for missing
or broken components. Missing, broken, or worn items must be replaced at once to reduce the possibility of
injury or death from thrown objects, entanglement, or blade contact.
8. PRE-OPERATION INSPECTION AND SERVICE
Before each use, a pre-operation inspection and service of the implement and tractor must be performed.
This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped
and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection
reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing
parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time
and repair cost can be avoided.
OPS-U-0029
8.1 Tractor Pre-Operation Inspection/Service
Refer to the Pre-Operation checklist to ensure a
complete pre-operation inspection is performed
according to the recommendations.
OPS-U-0030_A
8.2 Mower Pre-Operation Inspection/Service
Before each mower use, a complete inspection and service is required to ensure the mower is in a good and
safe working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To
ensure the mower is ready for operation, conduct the following.
OPS-R-0007
Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN,
WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR
OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLY
CAUSE SERIOUS INJURY FROM THROWN BLADES.
(SGM-10)