Akuvox SP-R5xP Administrator'S Manual Download

Page: 76 / 221

Administrator’s Guide for Akuvox SP-R5xP IP Phones

Page

221

Procedure

Anonymous call rejection can be configured using the configuration files or locally.

Configuration File

<r0000000000xx>.conf/<MAC>.conf

Configure anonymous call rejection.

Local

Web User Interface

Configure anonymous call rejection.

Navigate to:

http://<phoneIPAddress>/fcgi/do?id=3&id=2

To configure anonymous call rejection via web user interface:

1. Click on Account > Advanced

2. On Call, select the desired value from the pull-down list of Anonymous Call Rejection

3. Click Submit the accept the changes

Do Not Disturb

If a user activate Do Not Disturb (DND), it will prevent all calls. DND can be activated or

deactivated via DNA soft key. In addition, the DND on code and DND off code are used to

activate/deactivate the server-side DND feature. They may vary according to different servers.

Return Message When DND

This feature defines the return code and the reason of the SIP response message for the

rejected incoming call when DND is enabled on the IP phone. The caller’s phone LCD screen

Summary of Contents for SP-R5xP





























































































































































































































Search results

Summary of Contents for SP-R5xP

Reviews:

Related manuals for SP-R5xP

Brands by name

Popular brands

Akuvox SP-R5xP, Administrator'S Manual

Search results

Summary of Contents for SP-R5xP

Reviews:

Related manuals for SP-R5xP

Brands by name

Popular brands