Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page
32
of
221
Configuring PC Port Mode
The PC port on the back of the IP phone is used to connect a PC, which can be configured in
one of two modes:
Bridge: The IP phone functions as a bridge, and the connected PC appears on the network
as a stand-alone device with its own IP address.
Router: The IP phone functions as a router, and provides a DHCP service for the connected
PC.
If the PC port is unused, it can be disabled via web user interface or using configuration files.
Note
The Router mode is NOT applicable to SP-R50P phone.
Procedure
Pc port mode can be configured using the configuration files or locally
Configuration File
<r0000000000xx>.conf/<MAC>.conf
Configure the PC port mode.
Local
Web User Interface
Configure the PC port mode.
Navigate to:
http://<phoneIPAddress>/fcgi/do?id=2&id=1
Phone User Interface
Configure the PC port mode.
To configure the PC port mode via web user interface:
1. Click on Network > PC Port
2. Mark the desired radio box
If the As Router radio box is marked, you can configure the IP address for the PC port and
configure DHCP for the PC attached to the PC port.
1) Enter the IP address in the IP Address field.
2) Enter subnet mask in the Subnet Mask field.
3) Select the desired value from the pull-down list of Enable DHCP Server.
4) Enter the start IP address in the Start IP Address field.
5) Enter the end IP address in the End IP Address field.
