Akuvox SP-R5xP Administrator'S Manual Download Page 164

Page: 164 / 221

Administrator’s Guide for Akuvox SP-R5xP IP Phones

Page

163

221

Basic and advanced parameters

Note

The parameters included here are examples only. Not all possible parameters are shown in
this table

Parameter Name

Description

Config.Autoprovision. General.Url

Configure the url of the auto provisioning server.
The range of the value length is 1~255 characters.

Config.Autoprovision. General.Username

Configure the username and password for the
phone to be authenticated by the auto provision
server.
The range of the value length is 1~63 characters.

Config.Autoprovision. General.Pwd

Config.Autoprovision. Mode.Mode

Configure the auto provision mode.
0:Disable(default);
1:Power On;
2:Repeatedly;
3:Power On + Repeatedly.

Config.Autoprovision.Schedule.DayOfWeek

Configure the schedule time for auto provision
when the auto provision mode is Repeatedly or
Power On + Repeatedly.

DayOfWeek: The range is 0~7, 0 is for everyday

，

1~7 is for Monday~Sunday.
HourOfDay: The range is 0~23.

Config.Autoprovision.Schedule.HourOfDay

Config.Autoprovision. AES.Key16

Configure Aes key (16 bytes) for decrypting the
common config file.

Config.Autoprovision. AES.Key16Mac

Configure Aes key (16 bytes) for decrypting the
Mac-Oriented config file.

Config.Autoprovision.Pnp.Enable

Enable or Disable the PnP feature.
0:Disabled.
1:Enabled(default).

Config.Autoprovision. Dhcp_Option.Enable

Enable or Disable the DHCP option mode.
0:Disabled.
1:Enabled(default).

Config.Autoprovision. Dhcp_Option.CustomId

Configure the DHCP custom option.
The range of the value is 128~254.

Config.Network.Lan.Type

Configure the LAN port type.
0:DHCP(default).
1:PPPoE.
2:Static IP.

Summary of Contents for SP-R5xP





























































































































































































































Search results

Summary of Contents for SP-R5xP

Reviews:

Related manuals for SP-R5xP

Brands by name

Popular brands

Akuvox SP-R5xP, Administrator'S Manual

Search results

Summary of Contents for SP-R5xP

Reviews:

Related manuals for SP-R5xP

Brands by name

Popular brands