Akuvox SP-R5xP Administrator'S Manual Download

Page: 97 / 221

Administrator’s Guide for Akuvox SP-R5xP IP Phones

Page

221

4. Select Distinctive Ringers.

To configure the internal ringer text and internal ringer file via web user interface:

1. Enter the keywords in the Text fields.

2. Select the desired ring tones for each text from the pull-down lists of Internal Ringer

File.

3. Click Submit to accept the change.

Tones

The IP phone will be playing a warning tone when it receives a message. One is able to

customize tones, and for different conditions of the IP phone, specialized tone set can be

selected.

Available tone sets for IP phones:



China

Summary of Contents for SP-R5xP





























































































































































































































Search results

Summary of Contents for SP-R5xP

Reviews:

Related manuals for SP-R5xP

Brands by name

Popular brands

Akuvox SP-R5xP, Administrator'S Manual

Search results

Summary of Contents for SP-R5xP

Reviews:

Related manuals for SP-R5xP

Brands by name

Popular brands