- 66 -
Step
1. Expose the harness 11P and 7P units from the back of the main board unit.
2. Fit the Main Board Unit and the Main Switch Base Assy. into the grooves in the Frame L. (Assemble
the bunkered as shown in the figure.)
3. As shown in the figure, route the harness 7P unit between the rib of the Frame L and the Main Board
Unit, and between the bunkered and the Frame L ( ) to put it through a notch
.
4. Then, divide it into 3P (
) and 4P (
),
) to wire them as shown in the figure.
Route the harness of the Trigger Switch as with the harness 7P unit (
,
) and fit the Trigger Switch
into the boss of the Frame L.
5. Put the harness 11P unit coming from the Main Board unit through a notch
.
ASSEMBLY PROCEDURE
Harness 7P
Bunkered
Harness of a
Trigger switch
Terminals connected in
PROCESS: MAIN
SWITCH BASE ASSY. (4)
Notch
Harness 11P
How to Expose
harness 11P
and 7P Units
To Notch
To Notch
Harness 7P
Wiring
Notch
HARNESS 11P UNIT
(3P TO SENSOR
BOARD E UNIT)
Fitting Parts of Main
Board and Frame L
Notch
Notch
3P
→
Sensor Board C Unit
4P
→
Sensor Board F Unit
Notch
Harness (red)
Wiring
Fitting Parts of Sub-
Board and Frame L
Fitting Parts of Main Switch
Base and Frame L
Wiring
Wiring