- 74 -
Step
1. Connect the harnesses (green) and (brown) of a Feeding motor RS-550VF unit to those (green) and
(brown) coming out of a Frame L, respectively.
2. Connect the harness 3P (red) coming out of the Frame L to a Sensor Board C Unit.
3. Apply Molykote PG-662 Grease to the gear of the Feeding RS-550VF unit and assemble it to an
Internal Gear, and then, to the Frame.
(Assemble a Motor stopper and the Internal Gear to the rib of the Frame L, and a Feed Gear Base to
the rib of a Frame R.)
ASSEMBLY PROCEDURE
RB70351
(FEEDING MOTOR
RS-550VF ASSY)
Harness
(brown)
Harness
(green)
Sensor board
C unit
Fit onto the rib
of the Frame R.
Internal gear
Feed gear base
Motor
stopper
GREASE
MOLYKOTE PG-662
Harness
(blown)
Harness
(purple)
Confirm that the connector
has been fully inserted.
Important Note:
